Green Creative Direct T8 Value Select series T8 LEDs are direct replacement tubes designed to replace traditional 4-foot 32 watt fluorescent T8. A "plug & play" retrofit otion, these Type A lamps work with your operable Instant Start ballasts. Constructed with an opaque glass body to reduce glare, these T8s are suitable for damp locations and use in enclosed fixtures. Long life LED with L70 rating of 50,000 hours, these are suitable for many indoor general lighting applications. No fixture retrofit wiring is needed since these bulbs wiill run off the existing fluorescent ballst.
FEATURES
- LED T8 Tube: 4 foot | Warm White, 3000K | 10.5 watts | 1,600 lumens | ballast compatible (Type A)
- Only compatible with Instant Start ballasts
- Easily upgrade your existing fixtures to LED
- Simple plug-n-play solution, no fixture rewiring required.
- Opaque glass body reduces glare
- Meets NSF requirements (use of a shatter guard required)
- 310° extra wide light emitting area
- Save up to 68% energy compared to fluorescent tubes.
- Long life: 50,000 hour L70 life
- LEDs last 2.5x longer than fluorescents
- No warm-up time, instant on with full light output and consistent lamp to lamp color
- Suitable for dry and damp environments
- Suitable for open and enclosed fixtures
- Sold in case packs of 25
APPLICATIONS
- Office
- Classroom
- Schools & Universities
- Retail
- Hospital
- Hospitality
- Warehouse
NOTE: These Type A tubes are designed to function with operable Instant Start ballasts only. Do not use in fixtures where the existing ballast has been bypassed. Failure to adhere to instructions voids warranty. Check ballast compatibility list before purchasing.
- Product: LED T8 Tube
- Powered By: Operable Ballast (Instant Start Only)
- Wattage: 10.5W
- Lumens: 1,600 LM
- CRI: 82
- Operating Temp: -4° to 95°F
- Beam Angle: 310°
- Fixture Type: Open or Enclosed
- Base: G13 | Medium Bi-Pin
- Length (Nominal): 4FT
- Type: A - Ballast Compatible
- Brand: Green Creative 98551